1, belt buckle in handling and storage, should be kept clean, free from direct sunlight or rain and snow dipping, embankment and acid-base oil, organic flux and other objects in contact, and the gap between the installation of a fever except 1 meter.
2, the storage temperature should be maintained in the cargo compartment -18-40 degrees during which compared to the humidity should be maintained at 50-80% during.
3, the storage time, the goods must be placed in a volume, not on the fold, the placement time should turn about quarterly.
4, not the same species, the number of layers of the belt buckle should be taken in case of a wrong, the joints are best used adhesive method.
5, belt buckle type, structure, layers should be selected in accordance with the premise of the use of justice.
6, conveyor belt speed should be less than 2.5 m / s, large pieces of large wear materials should be fixed-force discharge installation should try to use low-speed.
7, handling machine drum radius and the relationship between the belt buckle cloth, drive roller, change to the drum supporting and the requirements of the bracket angle should be in accordance with the design requirements of the conveyor, fair election. To prevent the belt load start; belt deviation occurs, should be promptly corrected; belt partial damage, the timely use of artificial cotton to make up, so as not to expand; to prevent the belt from rack, pillar or block material block, To prevent the roller is covered by material, resulting in rotation failure, leaking dike dipped in the drum and tape during the period, pay attention to the belt part of the lubrication.