In the badge, the metal badge is the most common and most commonly used in the air for a long time to become more easily oxidized and other contaminated metal material production. How to make them in our hands, long-term preservation, is a big problem. Especially some of the more rare badge collection, because it has value, and their maintenance is more important. Here to do a simple analysis, for the maintenance of badges.
If the badge is dirty, first wipe the surface of the metal badge dirt, stubborn and strong across the dirt, it is necessary to use cleaners to clean up. If there is a rust badge set, you see the size, where appropriate, there will be rust, usually with a toothbrush to clean the toilet rust inhibitor. When the rust, should be gently back and forth until the rust is standard. In general, with a large area of the rinse is obvious rust is good, small area will get better use of toothpaste. But do not rust too much time to pay attention, gently brush to avoid including the pulp was removed badge.
In addition to dirt and rust, check to see if there is damage to the badge collection. Generally ancient enamel and polyester are more love away if they destroy the area and when the remedy, the adhesive coating is cracked or stripped of the paint where it will strengthen the paint. The specific method is as follows: 101 Instant adhesive, so that a small amount of glue and paint chips in the cracks fall in the bonding. Fast adhesion, colorless and transparent, especially for repair work. After the use of badges, paint the surface of the steel, but basically can not deny the enhanced plastic. Get very good results. This method must be in a very small amount of glue, which is to pay special attention.
Followed by corrosion and damage protection after the badges, badges sprayed on the surface of the wax layer, sprayed on the local layer of time after the formation of its protective film on the metal surface, rust layer, but also soften the paint, effectively prevent the turtle Crack, aging, but also increase the brightness of the paint, so that your badge is more beautiful.
Hardware badge in the maintenance process, the final re-packaging of the badges, the number of multi-under normal circumstances, you can use plastic bags, Zifeng Dai, is the best. And then the highest position in the bag on the label indicate the phone number or name.